How to Break in a RC Plane Engine

Like any combustion engines used in automobiles, motorcycles and lawn equipment, nitro gas-powered radio-controlled airplane engines need to have a break-in procedure done to them in order to properly "wear" the internal parts before regular use. This break-in process will assure that the engine will operate and seal correctly for the rest of its running life. If you start flying your RC airplane "all out" without breaking in the engine first, you will inhibit the engine's power potential or life expectancy. 

Dynam Pitts Model 12 Typhoon

Check with your specific model airplane engine's documentation for the recommended glow fuel grade for the break-in procedure. Model airplane fuel comes in three basic nitromethane grades: 10%, 15% and 20%.Decide how to break-in your model airplane engine. If the engine used for your airplane is already installed in the plane, break the engine in with it mounted to the fuselage. If you have not installed the engine in your model airplane, securely mount it to a workbench and hook it up to your fuel tank. 
Remove the wing of the model airplane and fill the fuel tank with glow fuel. Refer to your engine's operation manual to check for proper needle valve adjustment. The needle valve is the small thumb dial protruding from the carburetor and must be set so the engine will run "rich". 
Running the engine rich simply means increasing the concentration of fuel to air mixing within the carburetor. Screw the needle valve in all the way and then unscrew it to the proper amount of turns as dictated by your engine's operation manual. A rich needle valve adjustment will be 3 and 1/2 to 4 turns from screwed in position, according to www. rctophobby. com. 
Attach the glow starter to the glow plug, located on the top of the engine. Place the electric starter hub on the propeller cone and engage the electric motor to start the RC engine. Once the engine starts and runs steadily, vary the throttle from 1/4 to 1/3 of its maximum and occasionally rev the engine to half throttle. Shut off the engine after a couple minutes to allow for cooling time. Carefully place your thumb over the venturi opening, blocking the air intake to stop the engine. 
Be sure to keep your fingers away from the spinning propeller when performing this step. Start the engine back up after it has had enough time to cool down. Let it run for a couple minutes longer than before and continue varying the throttle. Repeat the cool down and running process until you have successfully used at least four tanks of fuel. Readjust the needle valve to the proper run setting outlined by the engine's operation manual. 

Nine Eagles 770B

Do this to keep your engine running smoothly and operating at the correct temperature. Perform a "pinch test" to determine the correct needle valve adjustments needed. Run the engine at full throttle and pinch the fuel line for one second; if the engine dies abruptly, then the fuel mixture is too "lean". A lean fuel setting means that there is a lesser concentration of fuel being mixed with the air inside the carburetor. 
A rich condition will cause the engine to speed up after you release the fuel line, a correct setting will indicate a slight speed up in engine speed when the fuel line is pinched and a drop of engine speed immediately after you let go of the fuel line.

Outdoor Flying of Esky

Hi, there! Long time no see! I am extremely excited to see you guys again! After a freezing cold winter, we have ushered a warmer day. I guess you must want to do some outdoor activities. Here the Esky is doing its second fly.

ESky 3in1 Beginner Heli

The Esky beginner helicopter series is the first of its kind. It is acompletely ready to fly package that includes co-axial, fixed pitch,and collective pitch system for the new pilot to advance their flyingskills. Essentially you’re getting the Esky Kob, Honey Bee, and Honey Bee CP2 all in one package. The package is pre assembled with the co-axial helicopter unit, the KOB. 
The honey bee and andhoney bee cp2 units are completely assembled with servos andmotors all pre-installed on their respective frame. This only requires minor installation of the landing gear, tail boom, receiver swap, andadjustments on the transmitter to complete theconversion. There are two extra sets of tail booms and landing gears whichensure you have plenty of replacement parts in the event of a mishapor crash. The 2.4ghz radio system is setup and ready to go out of thebox. 
The included 11.1v 800mah lithium polymer battery powers allthree units. 4 AA batteries are also included for the transmitter. This entire package is catered to the curious entry level radio controlledpilot. If you find the coaxial is too easy to fly, the fixed pitch is ready to go! Eliminate the hard decision for your first hobby grade chopper.This package includes all. You can begin to fly after fixing the battery and unwrapping the packing. It is suitable for indoor operation and you can operate outdoors under unwindy weather. Standard 4CH helicopter, candovarious sky ways flight such as hovering, crabbing and spiraling.Easy to operate and maintain, it is the best choice for RCbeginner.Statements were made by the installation of 370 aluminum cooling unit to make your flight more long time. Beginnersinstallation training, which can be effectively protected helicopter.

ESky 3in1 Beginner Heli

Help you fast access to flight. Statements were made by the end of installed cooling unit has not only improved the flight performance,but it also increases the service life.
As Esky RC Helicopter has no control over use, setup, final assembly, modification or misuse, noliability shall be assumed nor accepted for any resulting damage or injury. By the act of use or modification, the user accept all resultingliability. 
Now, I am sure that you can't wait to go out. For more challenge, the rctophooy is just here waiting fou you!

Indoor Flight Experience

Hello, my boys! What a freezing cold day today! I guess you must want to have fun in the room. Then you got the right place. The indoor RC Helicopter will give you a lot of fun. Esky's latest release, the Tandem Rotor! It has incredible scale detail withoutstanding flight stability. Factory assembled Ready-To-Fly R/Chelicopter with everything included. Checked, test-flown and Flight Guaranteed. Dual co-axial system gives nearly double the stability! Sostable - it almost hovers by itself! The Esky Tandem Rotor is designed to give absolute newcomers and sport pilots the ultimate thrill in RC model helicopter flight! Up until now, tandem rotor helicopters were consideredhugely expensive and difficult to fly strictly for experts only.

Esky Tandem Rotor

Not any more! Amazingly, the Tandem Rotor is easier to hover thannormal helicopters. Two coaxial rotor systems working together has to be flown to be believed Returns to the hover when sticks released! Formforward flight, the helicopter tends to return to the hover when the cyclic sticks are released! This makes it much easier to gain confidence quickly. No tail swing makes flying easier! For those used to conventionalhelicopters with pesky tail booms to keep straight; you'll be pleased tofind the absence of one of those just enhances and improves flight control!Tandem rotors are therefore different to single rotor helicopters, so be prepared to adjust your flying style and flight location. The tandem rotor blades of the Esky Chinook helicopter adopt a co-axialand counter-rotating system which makes it most suitable for indoor flight. Its characteristics are: easy controllable flying, simple operationand quick re-charging. The "4 in " mix controller integrates the functionsof Gyro, Mixer, ESC and Receiver. Two superior 180 motors and one7.4V Lithium battery offer powerful performance and long flight times.The canopy can be taken apart and re-assembled easily, allowingadjustments and repairs to be made very conveniently. It is alsoattractively finished and practical.
The new 2.4G remote control system adopts Advanced Spread SpectrumTechnology and digital FSK (Frequency Shift Key) coding technology.This combined with two digital servos, ensures a rapid response, precisecontrol and nimbler movement. 
With this system, several flyers can operate simultaneously within the same immediate area offering a safeand relaxed flying experience. You will be able not only to hover but tocontrol the helicopter in all directions. Make slow and fast turns to testyour skills placing the helicopter at chosen points around the room.Having mastered taking-off and landing, you will find countless ways toenjoy your Esky rc helicopter!
 

Esky Tandem Rotor RC Helicopter

We believe the Esky Tandem Rotor is notonly the best choice for the beginner but also great fun for the experienced flyer. It will bring endless enjoyment to you and your friends.Let's enjoy the fun flying beyond your dreams! 

OK, guys! It's time for you to get started.

Join Our RC World

Good morning, my dear friends. I am so excited to meet you guys on this sunny day! What do you do for relaxation on weekend? I'd like to propose a new product of Esky- Esky 2.4GHz Belt-CP CX RC Helicopter 6 Channel RTF (Blue Deluxe Edition). 

Esky Belt-CP CX RC Helicopter

The latest Esky Belt-CP CX is an upgrade version of the world famous Esky Belt-CP RC helicopter. With totally fresh apperance and new designs for the main rotor and tail rotor systems, the Belt-CP CX increases the stability, powerful and accuracy of the helicopter as well as to give more direct control by the pilot.
ESky has created a newly designed 2.4GHz frequency band,"2.4GHz" RC system with advanced Spread Spectrum Technology and digital FSK(frequency shift key)Coding Technology. This offers many advantages compared to traditional 72 MHz transmitters and 120 degree ECCPM Control System. Here are the features:the high performance and the heading Lock gyro is Capable of sport flying and 3D aerobatics stainless steel flybar, main shaft and tail shaft 450 brushless motor, 25A brushless ESC and 3S 11.1V 1800mAh 20C Li-Po battery deliver incredible power and performance.
The new 2.4G remote control system adopts Advanced Spread Spectrum technology and digital FSK (Frequency Shift Key) coding technology. This combined with four digital servos, ensures rapid response, precise control and nimbler movement RC helicopter, including the Esky RC helicopters are not toys. RC helicopters utilize various high-tech products and technologies to provide superior performance. 
The rotating blades on the model spin at high speed can cause potential risk or injury if used improperly. Adjustment of servo push rod. When flying, ensure throttle trimmer of the transmitter has been regulated to the lowest position and other throttling are in the center position. If the helicopter still lean to left or right,please remove the canopy. And examine the balance of the cross swash plate under state of ready to fly, if not horizontal, you can regular the servo pull-rod, tighten or loosen it correspondingly.Addjust both sides to keep the swash plate horizontal and then test flight.

Esky Belt-CP CX RC Helicopter

Compactly designed attractive color, exquisite scale body. Combined scale fuselage, convenient for daily use and maintenance.Optimized electronic system offers wonderful course flight.100 assembled and tested at the factory, ready-to-fly out of the box. Several canopy options provided for the customers.
Nice talking to you guys! I am sure that his weekend you will enjoy yourselves in our rctophobby.

Walkera Dragonfly V500D01 RC Helicopter

Hello, my buddies! Guess what I bring you today? There is no doubt that it is what you want most. Now, Come with me and have a look at a second new product of Walkera! 
It is the Walkera Dragonfly V500D01 6CH RC Helicopter w/2.4GHz Devo 10 Transmitter. Firstly Let's learn about some features. The metal rotor head cut by CNC, designed without flybar, features low power loss and great efficiency improvement. Controlled by 3-axis gyro, with flybarless balance electronic system,amend flight status automatically, makes more stable flight and flexible 3D performance.Reinforced carbon fiber main frame can easily handle violent 3D flights. So stable that it appears to float in the air. easily performing all 3D maneuvers. High quality imported bearings ensurereliablity.

Walkera Dragonfly V500D01 RC Helicopter 

Original pack without battery and charger. Flybarless control system integrates 2.4G receive circuit and three-axis gyro, and offers fine control, prompt response and accurate operation.Firm main body is made of 1.5mm carbon fiber. Smart design for battery holder meets various requirements for stability-oriented and flexibility-oriented hobbyists, by moving battery pack front or back. It features vigorous power, stable flight, prompt response, and strong anti-jamming capacity.
This product is not a toy. It is a piece of complicated equipment which harmoniously integrates engineering materials, mechanics,electronics, aerodynamic and high frequency radio. Correct installation and adjustment are necessary to avoid accidents taking place. The owner must always operate in a safe manner.Improper operation may result in serious property damage, bodily injury or even death. Walkera RC helicopter flight is a high risk hobby, whose flight should be kept far away from other people. Miss-assembled or broken main frame, defective electronic equipment, and/or problematic radio system will lead to unforeseen accidents such as bodily injury or property damage. The pilot must pay attention to the flight safety and understand his responsibility for accidents caused by his carelessness. CNC-cut metal flybarless rotor head is of both the stability of flybar and even more flexibility in 3D performance. 450mm carbon fiber main blades feature light weight and good rigidity and tenacity. They are suitable for aerobatic flights.

Walkera Dragonfly V500D01 RC Helicopter 

Thank you for purchasing a Walkera radio control aircraft product. In order to quickly and safety master the operation of the NEWV500D01 RC helicopter, please read the user handbook carefully and then keep it in a safe place for future consultation and reference. NEW V500D01 takes advantage of reinforced metal and 2.4G spread spectrum technology of 3-in-1 combination of receiving circuit, gyro and CCPM mixing.
So much for this introduction about our favorite RC helicopter. I guess you must quite familiar with this new toy. Hope you like it!

Yet another great product from the Nine Eagles line of micro helis, the Solo Pro 328 is the complete package for the new heli pilot and experienced pilots alike.

          Nine Eagles 328A  RC Helicopter

Whether you are a first timer, stepping up from a coaxial, or a seasoned pilot looking for a low stress flying experience, the Solo Pro 328 is for you! This heli is slightly larger than most other micro fixed pitch models on the market today, adding to its stablility. With its easy to handle flight characteristics, you will be in the air and impressing your friends in no time. 
Also, a unique feature to this model is two selectable flight modes - "Primary" and "Advanced". Primary mode is the default setting and is recommended for indoor flying and less experienced pilots as it offers smoother and easier to control flight characteristics. Advanced mode offers a more aggressive throttle curve and response and is recommeded for more experienced pilots. 

            Nine Eagles 328A  RC Helicopter 

The Nine Eagles Solo Pro 328A comes fully assembled. All that is needed to be done is to charge the battery with the included variable rate charger, insert the AA batteries into the radio, and your ready to fly. The included 2.4ghz transmitter with digital trims offers interference free flying, and can be easily converted from mode 1 to mode 2 in about 30 seconds. A spare set of main and tail blades come with the kit to get you back in the air if you have any bumps. 
If you have any interest in this RC helicopter, please browse the rctophobby.

Walkera Brushed Hoten-X 6 RC Helicopter

When we set foot in a new year, there are many new products launched in the 2013 too. Take a look at rc toys, you will find out many new toys have been there. The Walkera brushed Hoten-X UFO is one of the new designs of rc quadcopters.

Walkera Brushed Hoten-X  RC Helicopter

I am so excited for my new Walkera Brushed Hoten-X 6 Channel RTF RC Helicopter.It bring me so much surprise that I am hooked by it deeply. TransmitterWith DEVO 10, you can have 5.8G FPV real time imagemonitor. Latest 6-Axis Gyro Controlsystem provides super stable flight.Brushed Motor system ensures more powerful and fantasticflips and rollsflight. The simple and compact modularized design, easy to install andmaintain.The flight time will be up to 7 to 8 minutes with a 7.4V1000mAh Lipo battery. Brushed Motorsystem ensures more powerfulflips and rolls flight. There are 8 different channels can be selected.
You can choose the best frequency channel according to the image quality asfollows.This productis not a toy. It is a piece of complicated equipment which harmoniously integrates engineering materials, mechanics, electronics,aerodynamic and high frequency radio.DV04 Camera has the thefollowing two ways to control the video: Press the red switch once ontherear of the DV04 Camera, it means the DV04 Camera starts to video.Press the red switchagain to stop the video. Pull the Gear Switch to position“1”and keep about 1-2 seconds, then pullback to position“0”.After finish the process, the DV04 Camera starts to video. Pull Gear Switchagain to stop video. The Memory card must be inserted before theDE04 connects the battery, andremove the Memory card after power off.RX2458H-D receiver features. Receiver RX2458H-Dadopts 2.4G spreadspectrum technology with the functions of automatic scanning, code pairingand LED receiving indication.

Walkera Brushed Hoten-X  RC Helicopter

Integrated design of 6-Axis gyroand abitude control providesprecise locating in air.Walkera RC Helicopter flight is a high risk hobby, whose fligth should bekept far away from other people.The front propellers are in black color while the rear propellers are in orange. After connecttingthe power of theBrushed Hoten X, please check the propellers rotation direction, X front/backpropellers rotate CW, Y front/back propellers rotate CCW. Youcan adjust the radio trim button(except the throttle trim) if the quadcopter flight drift.
If you want more information, please log in rctophobby.

Walkera HM V450D01 V2 6CH RC Helicopter

Great discussions are par for the course here. Each day, we highlight a discussion that is particularly helpful or insightful, along with other great discussions and reader questions you may have missed. The name of the product is Walkera HM V450D01 V2 6CH RC Helicopter. Are you curious about the style? That’s so cool, isn’t it?

The big brother in Walkera flybarless family -  Walkera HM V450D01 V2, Upgraded from 3-Axis Gyro to 6-Axis Gyro, and came with a new Swashplate. We were stunt by the stability and the performance of this super bird! In Walkera's flybarless series, this V450D01 V2 is the big brother of the family, with the size and the help of the 6-Axis Gyro and all new Full Metal Gear Servos (WK-09-9), it performed "extremely stable" in mid air, and the ascending and descending is so very fast, because of the lack of "Flybar", it responded like nothing before! And the energy consumption is good, like you get 2-3 minutes more than ordinary helicopter with flybar. With this latest bird, Walkera can call themselves "RC Helicopter Company" instead of "Toy company", because this bird can really get a nice share in the traditional 450 helicopter market, V450D01 V2 is a very well developed product! 
This big helicopter is flybarless, it has a 6-Axis Gyro which very few manufacture have this technology, and Walkera is one of the biggest manufacture to go mass production of 6-Axis Gyros. What's more, it has all the good stuff pre-installed, like the Powerful Brushless Motor, 40A ESC, Full Metal Gear Servos (WK-09-9) and Carbon Fiber Main Frames and Main Rotor Blades. Sounds great, right? 

What is a Flybar? 
The flybar is a short, thin metal rod placed on top of the walkera rc helicopter. It is part of the rotor head’s structure, usually attached with a paddle on both ends. The flybar is a stabilizer. The heavier the paddle and longer the flybar, the more stable the heli. However, you can compensate by using the high-tech 3-Axis Gyro (the V450D01 V2 is better, it has 6-Axis Gyro!). The onboard 3D Gyro makes the heli fly so well that it performs just like an ordinary rotor head helicopter. 
 Just stop here today. If you want to know more information, click rctophobby for more answers.

Dynam Pitts Model 12 RC Airplane

Dear friends, nice to meet you too! What are we going to say today? That is Dynam Pitts Model 12 Typhoon Brushless 4Ch 2.4GHz RTF RC Airplane.What are we waiting for? 

Dynam has provided us another exciting aerobatic airplane once again. Introducing the new Pitts RTF. Pitts RTF is a aerobatic Dynam RC Airplanes for Advanced Pilots. The fuselage is constructed by EPOFLEX and painted. The wings, horizontal and vertical stabilizers are constructed by EPOFLEX and painted. Dynam Pitts Typhoon flies stable and agile and it is designed for 3D flying. This RTF RC airplane comes with 80% Ready To Fly with clear canopy, main landing gear and steerable tail landing gear, 2 main and one tail wheels, control-horns, pushrods, links, cpinner, propeller, small accessories, brushless motor and 50Aprogrammable ESC. 
This Dynam Pitts Model 12 is a mid sized fully aerobatic bi-plane designed to compete against the best of the best in 3D flight. The Pitts excels in high and low-speed flying, advanced 3D aerobaticsand pretty much anything else you want the plane to do! Like all Dynam planes, the Pitts is constructed from durable EPO foam which is crash resistant and easy to fix in case of a mishap. The Pitts is powered by a powerful Detrum BM3720A-KV650 outrunner brushless motor matched with a 13"x6" prop which give it unparelled hovering capabilities and can be flown both gently and aggressively without any trouble.

This kit is ready to fly and includes interference free 2.4G radio gear, battery and the only thing you will need is a 4S Lipo charger and you'll be ready to fly! OK, Do you know about it? Do you like it? Just move quickly to rctophobby.I am here waiting for you.

Nine Eagles Solo Pro 328A RC Helicopter

Nine Eagles factory presents the bigger brother of the 210A. Bigger size, with single blade design. Whether you're just graduating from coaxial helicopters or are a seasoned pilot, you will LOVE this heli! The Solo Pro 328 is a very  good choice. It has a Fixed Pitch one piece main rotor, easy to install, hard  to break. The whole Heli body is very light weight, making it very durable in a  crash, the simple mechanism also makes it great for beginners.

The Solo Pro helicopter is truly a entry class 4Channel helicopter. 4Channel means the helicopter can receive 4 signals from your transmitter, the signals  are as follows:

■Elevator : Going Forward / Backward

■Aileron : Sliding Left / Right

■Rudder / Yaw : Changing Nose Heading

■Throttle : Fly Higher / Lower

These are the basic controls for all RC Helicopters, so playing this Helicopter will get you to know which stick is for what movement for Big RC Helicopters. So we would say this is a good entry model of RC Helicopter.

The greatest feature on the Nine Eagles Solo Pro 328A is the 45 degree  Stabilizer Bar, we call this design the "Bell Rotor System". It gives the heli  totally new flying experience. Factory used weight blocks instead of paddles at the end of the stabilizer bar, this makes the Solo Pro 328A "Much More"  stable than ordinary rotor head design, as a trade off, it flies slower, but more stable. The whole body is made of elastic plastic that is hard to break  and  one thing is that, it is very light, making it durable in crash. With simple  mechanism, great  for beginners, as this means easy to repair.

The 2.4GHz radio system, allows you to fly with zero interference. Also,  multiple helicopters can fly at the same time in the same area! Worried about the throttle? Nine Eagles has done a good job about the changing of Mode,  simpily by turning the  antenna from one side to another, that's it!

Nine Eagles made a helicopter few years ago, called the Solo Pro 260A, that model has a huge success, because of the super stable performance and the  palm size package, it surely a best friend in the Office or at home.

 But comes to helicopter, the bigger the heli, the more stable it is, so Nine  Eagles pump up the scale to create this Solo Pro 328A. We classify this size as a Mini Size, also features a Bell Rotor Head, the distinctive 45 degrees  flybar gives a well balance between Agility and Stability, we would say that  the Bell  Rotor Head helis are the step between CoAxial Helis and the big outdoor Single Rotor Helis. Another feature is that the Solo Pro 328A is light  weight, plus the elastic landing skid and main rotor blades, it sure can take a  lot of abuse from a beginner, this is why we think the Solo Pro 328A is a  perfect choice for players that lacks of experience.

If you want to have a deeper understanding of it, please log in rctophobby.

Walkera QR X400 RC Helicopter

Good news! Walkera helicopter upcoming brand new UFO QR X400, the  appearance of a sense of exquisite design; then QR X400 fouraxis motor  with super durable brushless motor, the flight is not only stable, but also a  variety of 3D tumbling stunt move can be easily completed. QR  X400  camera can be configured to achieve aerial fun. Simultaneously using QR  X40011.1V 2200mAh 25C large capacity battery, get a longer flight  experience!

The simple and compact modularized design features of the Walkera QR  X400 FPVmake sure that make the in stallation and maintenance become  easier. It is equipped with 6Axis gyro control system which ensures precise  flight performance. Moreover,its extra large capacity battery delivers an extralong flight time.The canopy made of durable and flexible material strengthens the  resist of crash.The ultra durable plastic propellers will not easy to broken  during the crash, it is very suitable for the beginners.

During the using walkera rc helicopter , you need to make sure the airplane  mode is with FPV camera mount, do not use non FPV mode. Make dure  disconnect the UFO power when switching the mode, then operate based on related principles. Binding code method, open the radio first, connect the  QR X400 power last. After open the radio power button, please connect the QR X400 power in 10S, the signal indicator light begins flashing, the light will be solid after 1 to 3 seconds. After binding with the  radio, the red indicator  lights starts flashing and the BL motors resent, then the receiver has received the signal of the radio successfully , binding finished.When it be in FPV    mode, it flies as a rc airplane. Once you finished the binding, power off teh  quadcopter battery, insert teh BIND plug into hte AUX2 channels in the receiver, reconnect teh UFO power.When the receiver signal lights appear behind alternating red and blue flashing4 to 5 minutes, discount the UFO power  supply again,take down the BIND. Then turn on the UFO power, when the  receiver signal lights appear red light flashing 4 to 5 times into redand blue light quick flashing at the same time, then enter PFV mode. But remember this mode is not suitable for the 3D flight. To the contrary, you will enter the PFV  helicopter mode. This mode can be use on 3D flight.

2.4GHz is the standard of new generation radio system. It offers longer  transmission distance, less interference, more stable radio transmission and less  legal issue. For traditional radio frequency, helicopters in same frequency  cannot fly together because of interference. With 2.4GHz radio system,  many  helicopters can fly at the same time without interference. 

Features:

1.Adopting 4 brushless motors, the flight is more stable, and it can make  sorts of flight maneuver and also can make 3D rolls and flips.

2.The simple and compact modularized design features easy installation and maintenance

3.Adopting 6Axis gyro control system ,which ensures precise flight  performance.

4.You can install the camera set for Aerial photograghy. (Camera set needs to be purchased separately).

5.You can install the Telemetry module ,GPS and RPM to monitor the real  time battery voltage, temperature, motor speed rate and aircraft location and  height.

6.Extralarge capacity battery delivers an extra-long flight time! Walkera recommends using a11.1V 2200mAh LiPo 25C  LiPo battery for a perfect flight.

For more information,please visit rctophobby.

Nine Eagles 328A Bell-206 4CH 2.4GHz RC Helicopter

Nine Eagles factory presents the bigger brother of the 210A. Bigger size, with single blade design. Whether you’re just graduating from co- axial helicopters or are aseasoned pilot, you will love this heli! The Nine Eagles Solo Pro 328A is a verygood choice.It has a Fixed Pitch one piece main rotor, easy to install, hard to break.Thewhole Heli body is very light weight, making it very durable in a crash, the simple mechanism also makes it great for beginners.The Solo Pro helicopter is truly a entry class 4Channel helicopter. 4Channel means the helicopter can receive 4 signals from your transmitter.

These are the basic controls for all RC Helicopters, so playing this Helicopter will get you to know which stick is for what movement for Big Nine Eagles RC Helicopters. So we would say this is a good entry model of RC Helicopter.

Solo Pro 328 is a helicopter which in many ways sets the bar for other helicopters on the market. Never before have we seen a helicopter flying so stable and predictable as this. Are you going to learn to fly helicopters, you should definitely choose a solo Pro 328 it's perfect to fly indoors and is also excellent to fly outside in light winds. 

Nine Eagles Free Spirit 2.4Ghz RC Helicopter Description: The Next Step after CoAxial Helis - Nine Eagles Free Spirit328A Helicopter Honestly, we flew this 328A Free Spirit and loved it so much! The stability is off the scale, we actually open one box and place the heliand transmitter right next Jackys desk and played it all the time, let say, we choose thismodel among all other models and you know why..... The NineEagles 328AFree Spirit is specially built for beginners,it isthe perfect choice for people who have experience on CoAxialhelis and wants a bit more challenging afterwards! Thanksfor the Bell Rotor Head design, it flies as stable as a CoAxialHelicopter, but a bit more agile than that, we would say its amodel between Outdoor and Indoor entry model. So if youwish to go further in this hobby, the Bell Rotor Head Helis arethe great choice before you go for the expensive outdoor big heli.

Highlights:

1.A certain feature of wind resistance,Can fly both indoor and out door.

2.Nine Eagle’s rotating head structure, very steady in flight, flexible in action, easy for maintenance.

3.Blister emulation airframe, easy for dismounting ,beautiful coating, can both fly and provide static appreciation;

4.Five in one controller, owning five functions of 2.4GHZ receiver, electron speed regulator、locking type gyro、mix controller and server.

5.Higheffect hollow cup main motor and tail motor, making the flight quieter and more stable.

6.Standard remote control system of 2.4GHz, stable signal, strong in the  interference resistance.

7.Nine Eagle’s patent for transferring the transmitter easily from Mode 1 to Mode 2,making your communication with people of the same hobby more convenient.

To have a better understanding of it, please log in rctophobby.

Esky HONEY BEE CP3 6CH 2.4GHz RC Helicopter

Hello eveyone, today I to introduce the type of helicopter for you, hope you like it--Esky HONEY BEECP3 6CH 2.4GHz RCHelicopter RTF.

The original Esky Honey Bee CP2 was without doubt one of our more popular models for beginners who wanted a trainer model that was more of a challenge than the basic 4ch fixed pitch Honey Bee. 

The new Esky Honey Bee CP3 comes with a Li-Polymer battery as standard meaning flight times of 5-10 minutes; the model is available with the latest 2.4GHz technology, high speed digital servos all as standard.The Honey Bee CP3 is a great challenging beginner’s model for someone who wants a trainer model that can be used outdoors apposed to the Coaxial models that are solely for indoor use. What's the difference between CP3 and CP2? Other than the obvious aesthetic differences, the CP3 has a totally different design. For example, the landing skids and frame have undergone massive improvements making the esky rc helicopter far more durable. All the improvements combine to basically give a stronger and better flying helicopter. The CP3 also comes complete with an upgraded GHz transmitter as standard, offering greater range, greater reliability and a lower power consumption. The CP3 shares most of the parts with Honey Bee V2 , this keeps the cost of spares down! The Esky Honey Bee CP3 is also a good step up from the Co-Axial range of helicopters and will push your skills to the next level. The Honey Bee CP3 comes with everything you need to start flying including transmitter, battery and charger.

Here are some highlight features of Honey Bee CP3: 
■Adjustable Pitch Control System, stainless steel Fly Bar.

■The High-power strong magnetism motor equipped with high-efficient radiator is dynamical and effective.

■The airplane frame featured simple design and practical use; it can effectively avoid damage from falls and breaks.

■The Motor control system directly controls the tail rotor blade and has a good head-lock function.

■A direct drive tail system provides incredible power and response for tail commands, all while eliminating tail rotor gears for greater efficiency and less maintenance.

■370 super motor provides super power for high performance flight. Simple mechanical structure design, easy maintenance.

■Durable Material, capable of bearing most crashes without any damage.

■High performance main rotor blade significantly increase their strength for performing advanced 3D maneuvers.

■Helpful in practicing professional 3D aerobatic flight .

■Fully assembled and tested in the factory, ready to fly out of box.

2.4GHz Radio System provides almost Zero interference signal transmission, as well as linear control for all motors and servos. This package comes with the NEW Esky Transmitter --ESKY004446, which suits 6CH helicopter beginners.Just stop here today. If you want to know more information, click rctophobby for more answers.